CARING FOR

Cabinets

To maintain the finish on your cabinet use only a soft cloth and weak solution of non-abrasive detergent. To restore scratches, marks, etc. on two pack polyurethane, rub gently with car cutting compound, car polish or household brass/silver cleaner. Cabinets should be installed at least 300mm away from showers or bathtubs to avoid water damage. Goods used in construction are water/moisture resistant, not water-proof. Care must be taken to dry any excessive moisture or water spillage.

CARING FOR

Ceramic

To maintain the finish on your ceramic top use only a soft cloth and weak solution of non abrasive detergent. Due to the glazed surface of ceramic tops, scratches cannot be repaired or removed.

CARING FOR

Cast Marble

To maintain the finish on your Cast Marble top use only a soft cloth and weak solution of non-abrasive detergent. To restore scratches, marks, etc. on acrylic tops rub gently with car cutting compound, car polish or household brass/silver cleaner. 

CARING FOR Acrylic

To maintain the finish on your Acrylic top use only a soft cloth and weak solution of non abrasive detergent. To restore scratches, marks, etc. on acrylic tops rub gently with car cutting compound, car polish or household brass/silver cleaner. For deeper scratches or abrasions use 2000-grit wet sandpaper around the affected area then restore using car polish or household brass/silver cleaner.

CARING FOR

Cherry Pie,

Friday & Caesarstone®

Cleaning: Wipe clean with soft damp cloth or sponge. For basic stains, clean with mild detergents. It is recommended to periodically clean surface with a mild abrasive cleanser to maintain a uniform appearance. 

Care: Cherry Pie, Friday™ & Caesarstone® benchtops have excellent heat and chemical resistant properties compared to other surfacing products. To preserve the surface and protect against damage from heat, do not place hot items directly on the surface. Even though Cherry Pie, Friday™ and Caesarstone® can withstand high temperatures, prolonged periods or extreme heat can cause permanent damage.

Avoid contact with strong chemicals such as paint removers, acetone, oven cleaners and other strong chemicals. If exposed, promptly rinse with water as prolonged contact with such harsh chemicals can cause damage. For deep scratches or other damage, please contact ADP customer service for support and information. 

CARING FOR

Bamboo

Our bamboo benchtops are applied with two coats of MIROTHANE PU to all surfaces and inside of cutouts. Your MIROTHANE finished bamboo benchtop is easily maintained by wiping clean with water and/or diluted liquid detergents. Avoid products that contain silicone compounds such as ‘Mr Sheen’ and abrasives.

 

Light Cleaning: Use a soft, dry microfibre cloth. All spills should be cleaned immediately. General Cleaning: Use a microfibre cloth and mild detergent. Remove residual detergent with a damp cloth. Dry the surface with a soft, clean dry cloth to remove all water and to reduce streaking. A non-abrasive household cleaner may be used.

 

Subdued Gloss Surface (Satin or Semi Gloss): Mirotone Spray Glow furniture polish may be used to preserve a lustrous, no shine glow. Silicone-free, it is specially formulated with a blend of natural oils and waxes to enrich the coating. It is recommended to apply the polish every couple of months to maintain and preserve your bamboo products. Mirotone Sprayglow furniture polish is available for purchase from Mirotone.

CARING FOR

Plug & Waste

To clean use a soft cloth and weak solution of non abrasive detergent. Chrome parts can be polished and restored using car polish or household brass/silver cleaner with a soft microfibre cloth.

It is common for surface build up to occur on stainless steel surfaces as a reaction to some chemicals. It may appear like rust, however it is just build up on the surface. Polish will remove this.